| 587 | 12 | 147 |
| 下载次数 | 被引频次 | 阅读次数 |
LiNi0.5Mn1.5O4正极材料具有接近5V的电压平台,从而具有高的功率密度。综述了近年来LiNi0.5Mn1.5O4正极材料的合成及其掺杂改性的研究现状,重点对LiNi0.5Mn1.5O4正极材料的结构及其电化学性能进行了总结和探讨,并对LiNi0.5Mn1.5O4正极材料的发展前景进行了展望。
Abstract:LiNi0.5Mn1.5O4 cathode material has a potential plateau at about 5 V; thereby it has a higher power density. Recent progress on synthesis and doping modification of LiNi0.5Mn1.5O4 positive material is reviewed. Emphasis is placed on the generalization and discussion of structures and electrochemical properties of the positive materials. And the development prospect of LiNi0.5Mn1.5O4 positive material is viewed.
[1]施志聪,杨勇.聚阴离子型锂离子电池正极材料研究进展[J].化学进展,2005,17(4):604-613.
[2]伊廷锋,胡信国,霍慧彬,等.5V锂离子电池尖晶石正极材料LiM0.5Mn1.5O4的研究评述[J].稀有金属材料与工程,2006,35(9):1350-1353.
[3]Kim J H,Yoon C S,Myung S T.Phase transitions in Li1-δNi0.5Mn1.5O4during cycling at5V[J].Electrochem Solid-State Lett,2004,7(7):A216-A220.
[4]Muharrem K,Jafar F A,Glenn G A.High-power nanostruc-tured LiMn2-xNixO4high-voltage lithium-ion battery electrode materials:electrochemical impact of electronic conductivity and morphology[J].Chem Mater,2006,18:3585-3592.
[5]Kunduraci M,Amatucci G G.Synthesis and characterization of nanostructured4.7V LixMn1.5Ni0.5O4spinels for high-power lithium-ion batteries[J].J Electrochem Soc,2006,153(7):A1345-A1352.
[6]Fang H S,Wang Z X,Li X H,et al.Exploration of high ca-pacity LiNi0.5Mn1.5O4synthesized by solid-state reaction[J].Journal of Power Sources,2006,153(1):174-176.
[7]Xu H Y,Xie S,Ding N,et al,Improvement of electrochemi-cal properties of LiNi0.5Mn1.5O4spinel prepared by radiated polymer gel method[J].Electrochim Acta,2006,51(21):4352-4357.
[8]Fan Y,Wang J,Ye X,et al.Physical properties and electro-chemical performance of LiNi0.5Mn1.5O4cathode material pre-pared by a coprecipitation method[J].Mater Chem Phys,2007,103(1):19-23.
[9]Yi T F,Hu X G.Preparation and characterization of sub-mi-cro LiNi0.5-xMn1.5+xO4for5V cathode materials synthesized by an ultrasonic-assisted co-precipitation method[J].Journal of Power Sources,2007,167(1):185-191.
[10]Park S H,Sun Y K.Synthesis and electrochemical proper-ties of5V spinel LiNi0.5Mn1.5O4cathode materials prepared by ultrasonic spray pyrolysis method[J].Electrochim Acta,2004,50:431-434.
[11]Myung S T,Komaba S,Kumagai N,et al.Nano-crystalline LiNi0.5Mn1.5O4synthesized by emulsion drying method[J].Electrochim Acta,2002,47:2543-2549.
[12]Li D,Ito A,Kobayakawa K,et al.Electrochemical charac-teristics of LiNi0.5Mn1.5O4prepared by spray drying and post-annealing[J].Electrochim Acta,2007,52(5):1919-1924.
[13]Kim J H,Myung S T,Sun Y K.Molten salt synthesis of Li-Ni0.5Mn1.5O4spinel for5V class cathode material of Li-ion secondary battery[J].Electrochim Acta,2004,49(2):219-227.
[14]Lee Y S,Sun Y K,Ota S,et al.Preparation and characteri-zation of nano-crystalline LiNi0.5Mn1.5O4for5V cathode ma-terial by composite carbonate process[J].Electrochem Com-mun,2002,4(12):989-994.
[15]伊廷锋,王殿龙,胡信国.锂离子电池电极材料机械化学合成研究进展[J].现代化工,2006,26(6):20-24.
[16]Oh S H,Jeon S H,Cho W,et al.Synthesis and characteri-zation of the metal-doped high-voltage spinel LiNi0.5Mn1.5O4by mechanochemical process[J].J Alloys Compd,2006,10:153.
[17]Park S B,Eom W S,Jang H,et al.Electrochemical proper-ties of LiNi0.5Mn1.5O4cathode after Cr doping[J].Journal of Power Sources,2006,159(1):679-684.
[18]Mukerjee S,Yang X Q,Sun X,et al.In situ synchrotron X-ray studies on copper-nickel5V Mn oxide spinel cathodes for Li-ion batteries[J].Electrochim Acta,2004,49(20):3373-3382.
[19]Kim J H,Myung S T,Yoon C S,et al.Effect of Ti substitu-tion for Mn on the structure of LiNi0.5Mn1.5-xTixO4and their electrochemical properties as lithium insertion material[J].J Electrochem Soc,2004,151(11):A1911-A1918.
[20]Locati C,Lafont U,Simonin L,et al.Mg-doped LiNi0.5-Mn1.5O4spinel for cathode materials[J].Journal of PowerSources,2007,174(2):847-851.
[21]Oh S W,Park S H,Kim J H,et al.Improvement of electro-chemical properties of LiNi0.5Mn1.5O4spinel material by fluo-rine substitution[J].Journal of Power Sources,2006,157(1):464-470.
[22]Fan Y,Wang J,Tang Z,et al.Effects of the nanostructured SiO2coating on the performance of LiNi0.5Mn1.5O4cathode materials for high-voltage Li-ion batteries[J].Electrochim Acta,2007,52(11):3870-3875.
[23]Miyashiro H,Seki S,Kobayashi Y,et al.All-solid-state lithium polymer secondary battery with LiNi0.5Mn1.5O4by mixing of Li3PO4[J].Electrochem Commun,2005,7(11):1083-1086.
[24]Ooms F G B,Kelder E M,Schoonman J,et al.High-voltage LiMgδNi0.5-δMn1.5O4spinels for Li-ion batteries[J].Solid State Ionics,2002,152-153:143-153.
[25]Sun Y K,Hong K J,Prakash J,et al.Electrochemical per-formance of nano-sized ZnO-coated LiNi0.5Mn1.5O4spinel as5V materials at elevated temperatures[J].Electrochem Commun,2002,4(4):344-348.
[26]Sun Y K,Yoon C S,Oh I H.Surface structural change of ZnO-coated LiNi0.5Mn1.5O4spinel as5V cathode materials at elevated temperatures[J].Electrochim Acta,2003,48(5):503-506.
基本信息:
中图分类号:TM912.9
引用信息:
[1]伊廷锋,岳彩波,何孝军,等.LiNi_(0.5)Mn_(1.5)O_4材料合成及性能的研究综述[J].电池工业,2008,No.76(04):262-266.
2008-08-25
2008-08-25