| 505 | 0 | 250 |
| 下载次数 | 被引频次 | 阅读次数 |
随着锂离子电池向更高能量密度、更长循环寿命和更高安全性方向发展,传统铜箔集流体在界面稳定性、抗腐蚀性能和结合强度等方面的局限性日益凸显。本文系统综述了改性铜箔集流体的最新研究进展,从亲锂性增强、表面涂层工程、三维结构设计和复合集流体开发四个维度全面梳理了改性技术体系,深入分析了各类技术在硅负极、锂金属负极、无负极电池和固态电池等不同体系中的应用特点。重点讨论了改性铜箔集流体在提升界面结合力、抑制枝晶生长、改善循环稳定性等方面的作用机制,以及当前产业化进程中的技术挑战和发展趋势。文献分析表明,植酸改性、聚多巴胺涂层、氧化铜阵列、石墨烯包覆等技术可显著改善铜箔界面性能,复合集流体在安全性、成本和能量密度方面展现出独特优势。未来研究应聚焦于界面稳定性优化、导电性能平衡、结构精确控制以及产业化工艺突破,为下一代高能量密度电池技术提供关键支撑。
Abstract:As lithium-ion batteries evolve toward higher energy density, extended cycle life, and enhanced safety, the limitations of traditional copper foil current collectors—specifically regarding interfacial stability, corrosion resistance, and adhesion strength—have become increasingly prominent. This paper systematically reviews recent advances in modified copper foil current collectors, categorizing the modification strategies into four key dimensions: lithiophilic enhancement, surface coating engineering, three-dimensional (3D) structural design, and the development of composite current collectors. We conduct an in-depth analysis of the application characteristics of these technologies across various battery systems, including silicon anodes, lithium metal anodes, anode-free batteries, and solid-state batteries. Particular emphasis is placed on the mechanisms by which modified copper foils enhance interfacial adhesion, suppress dendrite growth, and improve cycling stability, alongside a discussion on the technical challenges and trends in industrialization. Literature analysis indicates that technologies such as phytic acid modification, polydopamine coatings, copper oxide arrays, and graphene encapsulation can significantly optimize interfacial properties, while composite current collectors demonstrate distinct advantages in safety, cost reduction, and energy density. Future research should focus on optimizing interfacial stability, balancing electrical conductivity, achieving precise structural control, and overcoming process bottlenecks in industrialization to provide critical support for next-generation high-energy-density batteries.
[1] FEI X Y,DONG Z C,GONG B K,et al.Lightweight through-hole copper foil as a current collector for lithium-ion batteries[J].ACS Applied Materials & Interfaces,2021,13(35):42266-42275.
[2] FAN H L,MAO P C,SUN H Y,et al.Recent advances of metal telluride anodes for high-performance lithium/sodium–ion batteries[J].Materials Horizons,2022,9(2):524-546.
[3] ALI GHAZI Z,SUN Z H,SUN C G,et al.Key aspects of lithium metal anodes for lithium metal batteries[J].Small,2019,15(32):1900687.
[4] GUO Y P,LI H Q,ZHAI T Y.Reviving lithium-metal anodes for next-generation high-energy batteries[J].Advanced Materials,2017,29(29):1700007.
[5] WENG Y T,LIU H W,PEI A,et al.An ultrathin ionomer interphase for high efficiency lithium anode in carbonate based electrolyte[J].Nature Communications,2019,10:5824.
[6] QIN G Q,JIA Z T,SUN S Y,et al.Carbon-coated Si nanosheets as anode materials for high-performance lithium-ion batteries[J].ACS Applied Nano Materials,2024,7(7):7595-7604.
[7] CHENG X B,ZHANG R,ZHAO C Z,et al.Toward safe lithium metal anode in rechargeable batteries:A review[J].Chemical Reviews,2017,117(15):10403-10473.
[8] FAN X L,CHEN L,BORODIN O,et al.Non-flammable electrolyte enables Li-metal batteries with aggressive cathode chemistries[J].Nature Nanotechnology,2018,13(8):715-722.
[9] LI P L,DONG X L,LI C,et al.Anchoring an artificial solid–electrolyte interphase layer on a 3D current collector for high-performance lithium anodes[J].Angewandte Chemie International Edition,2019,58(7):2093-2097.
[10] TANG Y P,SHEN K,LV Z Y,et al.Three-dimensional ordered macroporous Cu current collector for lithium metal anode:Uniform nucleation by seed crystal[J].Journal of Power Sources,2018,403:82-89.
[11] UMH H N,PARK J,YEO J,et al.Lithium metal anode on a copper dendritic superstructure[J].Electrochemistry Communications,2019,99:27-31.
[12] ZHANG C Y,LIU S,LI G J,et al.Incorporating ionic paths into 3D conducting scaffolds for high volumetric and areal capacity,high rate lithium-metal anodes[J].Advanced Materials,2018,30(33):1801328.
[13] ZHANG X Y,LV R J,WANG A X,et al.MXene aerogel scaffolds for high-rate lithium metal anodes[J].Angewandte Chemie International Edition,2018,57(46):15028-15033.
[14] LIU Y T,ELIAS Y,MENG J S,et al.Electrolyte solutions design for lithium-sulfur batteries[J].Joule,2021,5(9):2323-2364.
[15] LIU Y Z,MENG X Y,WANG Z Y,et al.Development of quasi-solid-state anode-free high-energy lithium sulfide-based batteries[J].Nature Communications,2022,13:4415.
[16] NANDA S,BHARGAV A,MANTHIRAM A.Anode-free,lean-electrolyte lithium-sulfur batteries enabled by tellurium-stabilized lithium deposition[J].Joule,2020,4(5):1121-1135.
[17] REN Y X,BHARGAV A,SHIN W,et al.Anode-free lithium–sulfur cells enabled by rationally tuning lithium polysulfide molecules[J].Angewandte Chemie International Edition,2022,61(35):e202207907.
[18] YIN Y J,YANG Y,CHENG D Y,et al.Fire-extinguishing,recyclable liquefied gas electrolytes for temperature-resilient lithium-metal batteries[J].Nature Energy,2022,7(6):548-559.
[19] DUAN H,ZHANG J,CHEN X,et al.Uniform nucleation of lithium in 3D current collectors via bromide intermediates for stable cycling lithium metal batteries[J].Journal of the American Chemical Society,2018,140(51):18051-18057.
[20] HUANG Z J,ZHANG C,LV W,et al.Realizing stable lithium deposition by in situ grown Cu_(2)S nanowires inside commercial Cu foam for lithium metal anodes[J].Journal of Materials Chemistry A,2019,7(2):727-732.
[21] CHEN L Y,CHIANG C L,WU X H,et al.Prolonged lifespan of initial-anode-free lithium-metal battery by pre-lithiation in Li-rich Li_(2)Ni_(0.5)Mn_(1.5)O_(4) spinel cathode[J].Chemical Science,2023,14(8):2183-2191.
[22] CHEN Y,ZHAO L K,ZHOU J L,et al.Advances in the use of carbonaceous scaffolds for constructing stable composite Li metal anodes[J].New Carbon Materials,2023,38(4):698-718.
[23] COSBY M R,CARIGNAN G M,LI Z,et al.operandoSynchrotron studies of inhomogeneity during anode-free plating of Li metal in pouch cell batteries[J].Journal of the Electrochemical Society,2022,169(2):020571.
[24] LI G C,LIANG K,LI Y J,et al.Catalytic anode surface enabling in situ polymerization of gel polymer electrolyte for stable Li metal batteries[J].Nano Research,2024,17(6):5216-5223.
[25] WANG X R,LI H,FU W H,et al.Cooperation of covalent bonds and coordinative bonds stabilizing the Si-binder-Cu interfaces for extending lifespan of silicon anodes[J].Journal of Colloid and Interface Science,2025,683:36-45.
[26] WANG W B,YANG Z H,ZHANG Y T,et al.Highly stable lithium metal anode enabled by lithiophilic and spatial-confined spherical-covalent organic framework[J].Energy Storage Materials,2022,46:374-383.
[27] HUANG S B,ZHANG W F,MING H,et al.Chemical energy release driven lithiophilic layer on 1 m(2) commercial brass mesh toward highly stable lithium metal batteries[J].Nano Letters,2019,19(3):1832-1837.
[28] LU Z Y,TAI Z X,YU Z P,et al.Lithium–copper alloy embedded in 3D porous copper foam with enhanced electrochemical performance toward lithium metal batteries[J].Materials Today Energy,2021,22:100871.
[29] LIU H,CHENG X B,XU R,et al.Plating/stripping behavior of actual lithium metal anode[J].Advanced Energy Materials,2019,9(44):1902254.
[30] XU L H,LI L X,SU C.Preparation of silicon/carboxymethylcellulose-polydopamine/carbon nanotube composite material and its electrochemical performance as anode of lithium-ion batteries[J].Journal of Electrochemical Energy Conversion and Storage,2025,22(4):041013.
[31] FENG J W,ZHANG T,LIU M,et al.A cross-scale collaborative design of copper current collectors for practical anode-free lithium metal batteries[J].EES Batteries,2026.
[32] AN Y L,FEI H F,ZENG G F,et al.Vacuum distillation derived 3D porous current collector for stable lithium–metal batteries[J].Nano Energy,2018,47:503-511.
[33] XU P,HU X Y,LIU X Y,et al.A lithium-metal anode with ultra-high areal capacity (50 mAh Cm-2) by gridding lithium plating/stripping[J].Energy Storage Materials,2021,38:190-199.
[34] SHI H F,ZHANG W Y,WANG D H,et al.Facile preparation of silicon/carbon composite with porous architecture for advanced lithium-ion battery anode[J].Journal of Electroanalytical Chemistry,2023,937:117427.
[35] ZHOU B X,BONAKDARPOUR A,STO?EVSKI I,et al.Modification of Cu current collectors for lithium metal batteries–A review[J].Progress in Materials Science,2022,130:100996.
[36] ZHOU T H,ZHAO Y,FRITZ P W,et al.Molecular regulation of electrolytes for enhancing anode interfacial stability in lithium–sulfur batteries[J].Chemical Communications,2023,59(53):8286-8289.
[37] YANG C P,YIN Y X,ZHANG S F,et al.Accommodating lithium into 3D current collectors with a submicron skeleton towards long-life lithium metal anodes[J].Nature Communications,2015,6:8058.
[38] PARK S K,COPIC D,ZHAO T Z,et al.3D porous Cu-composites for stable Li-metal battery anodes[J].ACS Nano,2023,17(15):14658-14666.
[39] LIU Y H,LI Y F,SUN J M,et al.Present and future of functionalized Cu current collectors for stabilizing lithium metal anodes[J].Nano Research Energy,2023,2:e9120048.
[40] YANG Z H,RUAN Q L,XIONG Y,et al.Highly stable lithium metal anode constructed by three-dimensional lithiophilic materials[J].Batteries,2023,9(1):30.
[41] ZHAO H,LEI D N,HE Y B,et al.Compact 3D copper with uniform porous structure derived by electrochemical dealloying as dendrite-free lithium metal anode current collector[J].Advanced Energy Materials,2018,8(19):1800266.
[42] GAN M T,ZHU M J,TU J P,et al.Phytic-acid-modified copper foil as a current collector for lithium-ion batteries[J].Metals,2024,14(2):247.
[43] SHE Z M,GAD M,MA Z,et al.Enhanced cycle stability of crumpled graphene-encapsulated silicon anodes via polydopamine sealing[J].ACS Omega,2021,6(18):12293-12305.
基本信息:
中图分类号:TG146.11;TM912
引用信息:
[1]古洪亮,徐泽阳,宋珊珊,等.改性铜箔集流体研究进展:技术策略、性能提升与产业化前景[J].电池工业().
基金信息:
成都工业学院2025年大学生创新训练计划立项(202530316093)
2026-03-16
2026-03-16
2026-03-16