| 565 | 11 | 159 |
| 下载次数 | 被引频次 | 阅读次数 |
质子交换膜燃料电池(PEMFC)堆低温储存和启动是燃料电池系统实际应用必然会经历的过程。从实用角度出发,主要对燃料电池堆的低温储存和冷启动方法的一系列发明专利进行了综述,分析了各自的优缺点,认为利用燃料电池系统固有设备和所存储的能量进行自启动是具有实用前景的方法。
Abstract:During the application of PEM fuel cell,it is inevitable to face the problems of storage and start-up at sub-zero environment.From a practical standpoint,a series of patents about storage and cold-start methods at low temperature are received,and the advantages and disadvantages are analyzed too.It is suggested that using the inherent equipments of the fuel cell system and the stored energy to achieve the cold-start of PEM fuel cell stack is a promising method.
[1]衣宝廉.燃料电池:原理·技术·应用[M].北京:化学工业出版社,2003.
[2]Johan Ko,Hyunchul Ju.Effects of cathode catalyst layer design parameters on cold start behavior of polymer electrolyte fuel cells(PEFCs)[J].International Journal of Hydrogen Energy,2013,38:682-691.
[3]Yueqi Luo,Qian Guo,Qing Du,et al.Analysis of cold start processes in proton exchange membrane fuel cell stacks[J].Journal of Power Sources,2013,224:99-114.
[4]Nilson Henao,Sousso Kelouwani,Kodjo Agbossou,et al.Proton exchange membrane fuel cells cold startup global strategy for fuel cell plug-in hybrid electric vehicle[J].Journal of Power Sources,2012,220:31-41.
[5]候俊波,俞红梅,张生生,等.PEMFC 0℃以下保存与启动研究进展[J].电源技术,2006(9):779-784.
[6]Wolfram Birk.Fuel cell system and method for starting a fuel cell system:US,6756143B2[P].2004-06-29.
[7]高全勇,侯中军,王克勇,等.一种燃料电池保温系统:CN,201946691[P],2010-08-24.
[8]侯中军,高全勇,王克勇,等.一种燃料电池冷却循环水箱加热装置:CN,201877514[P].2011-06-22.
[9]王仁芳,秦连庆,江洪春,等.一种延长燃料电池电堆低温储存时间的装置:CN,201758156[P].2011-03-09.
[10]徐洪峰,明平文,侯中军,等.一种质子交换膜燃料电池低温启动系统及启动装置:CN,101587961[P],2009-11-25.
[11]Kurt Osborne,Milos Milacic,William Sanderson,et al.Temperature-based vehicle wakeup strategy to initiate fuel cell freeze protection:US,7368193[P].2008-05-06.
[12]Kurt Osborne,Fred Brighton,Jon Beasley,et al.Temperature-based vehicle wakeup strategy to initiate fuel cell freeze protection:US,7270903[P].2007-09-18.
[13]Joy A.Roberts,Jean St-Pierre,Marian E.van der Geest,et al.Method for improving the cold starting capability of an electrochemical fuel cell:US,6479177[P].2002-11-12.
[14]罗马吉,王芳芳,刘威,等.二次吹扫条件下的PEMFC冷启动实验[J].华中科技大学学报(自然科学版),2011,39(6):116-120.
[15]孙树成,俞红梅,王洪卫,等.一种质子交换膜燃料电池在零度以下启动的方法:CN,101170194[P].2008-04-30.
[16]Michael Cartwright,Glenn W Skala.Supplemental coolant heating for fuel cell with metal plates:US,2008/0118788A1[P].2008-05-22.
[17]Kazuhiro Yamada.Fuel cell system and related operating method:US,6887608[P].2005-05-03.
[18]Kazuhiro Yamada.Fuel cell device and related control method:US,7537850[P].2009-05-26.
[19]Daniel I Harris.Repid light-off catalytic combustor for fuel cell vehicle:US,7960064[P].2011-06-14.
[20]俞红梅,王洪卫,孙树成,等.一种燃料电池低温启动的方法及装置:CN,101170187A[P].2008-04-30.
[21]Uwe Limbeck.Fuel cell system with improved cold start properties and method of operating same:US,2010/0266913A1[P].2010-10-21.
[22]Joy Roberts,Marian vander Geest,Jean St-Pierre,et al.Method and apparatus for increasing the temperature of a fuel cell:US,6764780B2[P].2004-07-20.
[23]Fangming Jiang,Chao-Yang Wang,Ken S Chen.Current ramping:A strategy for rapid start-up of PEMFCs from subfreezing environment[J].Journal of the Electrochemical Society,2010,157(3):342-347.
[24]詹志刚,吕志勇,黄永,等.质子交换膜燃料电池冷启动及性能衰减研究[J].武汉理工大学学报,2011,33(1):1-5.
[25]江洪春,侯中军,干全全,等.一种燃料电池低温启动的空气回流加热系统:CN,102751521A[P].2012-10-24.
[26]George Steve Saloka,James A Adams.System and method for rapid preheating of an automotive fuel cell:US,6916566B2[P].2005-07-12.
[27]Tomoki Kobayashi,Yoshio Nuiya,Mitsuru Kai.Warm-up apparatus for fuel cell:US,7141326B2[P].2006-11-28.
[28]Tomoki Kobayashi,Yoshio Nuiya,Mitsuru Kai.Warm-up apparatus for fuel cell:US,7887965B2[P].2011-02-15.
[29]Shigeru Inal,Hiromichi Yoshida,Ryo Jinba.Method of actuating fuel cell system and fuel cell system:US,8241803B2[P].2012-08-14.
[30]Matthew C Kirklin,Perm C Menon,Bruce J Clingerman.Control method for cold fuel cell system operation:US,8192881B2[P].2012-06-05.
[31]William S Wheat,Mark A Meltser,David A Masten.Fuel cell energy management system for cold environments:US,8288049[P].2012-10-16.
[32]Dirk Wexel,Jurgen Thyroff,Bernd Peter Elgas.Fuel cell heating:US,8313871[P].2012-11-20.
[33]Emerson R Gallagher.Passive microcoolant loop for an electrochemical fuel cell:US,7547482B2[P].2009-06-16.
[34]Jesse,Matthias,Klaus,et al.Fuel cell system and method of starting a fuel cell system in cold start phase:EP,2008/009761[P].2008-10-19.
[35]Naoya Matsuoka.Warm-up of fuel cell power plant:US,7108928B2[P].2006-09-19.
[36]Takahashi Takeshi.Fuel cell power generating system:JP,07302607[P].1995-11-14.
[37]Eric J Connor,Daniel P Miller,Wenbin Gu,et al.Insulating layer for a fuel cell assembly:US,8206871B2[P].2012-06-26.
[38]Andreas Docter,Georg Frank,Gerhard Konrad,et al.Fuel cell and method cold-starting such a fuel cell:US,2008/0102327[P].2008-05-01.
基本信息:
中图分类号:TM911.4
引用信息:
[1]胡章蓉,詹志刚,王慧,等.PEM燃料电池堆低温储存与启动方法[J].电池工业,2013,18(06):324-328.
2013-12-25
2013-12-25