| 129 | 0 | 183 |
| 下载次数 | 被引频次 | 阅读次数 |
临近空间(20~100 km)兼具低温、低气压、强紫外辐射及剧烈温变等极端环境特征,对太阳电池的环境适应性、功质比及长期稳定性提出了严苛要求。作为临近空间飞行器能源系统的核心能量输入单元,太阳电池的选型与工程集成水平直接决定飞行器的驻空时长、载荷能力及任务可靠性。本文系统分析临近空间环境特征及太阳电池的多维度性能需求;深化对比晶硅、砷化镓、铜铟镓硒、碲化镉、钙钛矿的核心性能与工程化瓶颈;详细探索工程常用封装结构与材料组合,分析串接技术与机囊一体化集成方案的适配性;建立“环境适配-性能匹配-工程可行”三位一体的选型体系,针对平流层飞艇、太阳能无人机、高空气球等场景给出选型建议;最后明确高压化、低成本、易维护、强耐候等未来工程应用关键技术方向。本文为临近空间飞行器快速产业化发展提供全面技术支撑。
Abstract:Near space (20~100 km) is characterized by extreme environments including low temperature, low air pressure, strong ultraviolet radiation, and drastic temperature changes, which impose stringent requirements on the environmental adaptability, power-to-mass ratio, and long-term stability of solar cells. As the core energy input unit of the energy system for near-space vehicles, the selection and engineering integration level of solar cells directly determine the station-keeping duration, payload capacity, and mission reliability of the vehicles. This paper systematically analyzes the environmental characteristics of near space and the multi-dimensional performance requirements of solar cells; deeply compares the core performance and engineering bottlenecks of crystalline silicon, gallium arsenide, copper indium gallium selenide, cadmium telluride, and perovskite solar cells; investigates the commonly used packaging structures and material combinations in engineering, and analyzes the compatibility of interconnection technology and airframe-envelope integrated integration schemes; establishes a trinitarian selection system of “environmental adaptability-performance matching-engineering feasibility”, and provides selection suggestions for stratospheric airships, solar-powered unmanned aerial vehicles, high-altitude balloons, and other scenarios. Finally, the key engineering application technology directions in the future are clarified, including high-voltage, low-cost, easy-maintenance, and high-weatherability. This paper provides comprehensive technical support for the rapid industrialization of near-space vehicles.
[1] 杨君琳,蒋崇文,祝明,等.临近空间发展现状、问题及对策研究[J].中国工程科学,2024,26(5):128-136.
[2] 祝明,陈天,梁浩全,等.临近空间浮空器研究现状与发展展望[J].国际航空,2016(1):22-25.
[3] 马东立,张良,杨穆清,等.超长航时太阳能无人机关键技术综述[J].航空学报,2020,41(3):29-58.
[4] 朱立宏,孙国瑞,呼文韬,等.太阳能无人机能源系统的关键技术与发展趋势[J].航空学报,2020,41(3):80-91.
[5] 曲鹏,王寅.太阳能无人机电源系统的发展现状与展望[J].电源技术,2015,39(4):864-866,870.
[6] 杨宇丹,朱炳杰,郭正,等.太阳能无人机能源系统参数的敏度分析[J].上海交通大学学报,2020,54(10):1045-1052.
[7] 张志成,李鹏,左志强,等.临近空间太阳能飞行器能源系统控制综述[J].控制与决策,2024,39(6):1761-1777.
[8] 徐国宁,张衍垒,陈康,等.临近空间飞艇电源系统技术难点及发展趋势[J].北京航空航天大学学报,2025,51(8):2573-2586.
[9] 郑威,宋琦,李勇,等.平流层飞艇太阳电池阵发电功率计算及分析[J].宇航学报,2010,31(4):1224-1230.
[10] 杨希祥,侯中喜,韩喻,等.平流层飞艇太阳电池阵输出性能多因素影响规律[J].北京航空航天大学学报,2025,51(8):2587-2593.
[11] 刘文平,李钏,刘硕,等.临近空间飞艇能源昼夜闭环仿真验证系统研究[J].电源技术,2023,47(9):1215-1218.
[12] 赵文婕,韩安军,孟凡英,等.临近空间用柔性晶硅异质结太阳电池[J].北京航空航天大学学报,2025,51(8):2642-2651.
[13] 潘振,呼文韬,王寅,等.适用于太阳能飞行器的单晶硅太阳电池[J].电源技术,2016,40(8):1722-1725.
[14] YAN B J,YANG J,GUHA S.Amorphous and nanocrystalline silicon thin film photovoltaic technology on flexible substrates[J].Journal of Vacuum Science & Technology A:Vacuum,Surfaces,and Films,2012,30(4):04D108.
[15] LIU W Z,LIU Y J,YANG Z Q,et al.Flexible solar cells based on foldable silicon wafers with blunted edges[J].Nature,2023,617(7962):717-723.
[16]Rapinett A. Zephyr: a high altitude long endurance unmanned air vehicle[D]. Guildford: University of Surrey, 2009: 16-19.
[17]https://mldevices.com/photovoltaics-2/
[18] 王甜甜,王凯,李辉.铜铟镓硒(CIGS)薄膜太阳电池研究进展[J].稀有金属,2024,48(10):1475-1501.
[19] CARRON R,NISHIWAKI S,FEURER T,et al.Advanced alkali treatments for high-efficiency Cu(In,Ga)Se_(2) solar cells on flexible substrates[J].Advanced Energy Materials,2019,9(24):1900408.
[20] MAHABADUGE H P,RANCE W L,BURST J M,et al.High-efficiency,flexible CdTe solar cells on ultra-thin glass substrates[J].Applied Physics Letters,2015,106(13):133501.
[21] 林新璐.高效柔性碲化镉薄膜太阳电池的研究[D].北京:中国科学院大学,2022.
[22] 李欣然,王丹,娄艳辉.表面处理提高全无机CsPbBrI2钙钛矿太阳能电池性能[J].电池工业,2020,24(5):241-246,254.
[23] 赵政晶,蔡子贺,张赟,等.柔性钙钛矿太阳电池研究进展[J].北京航空航天大学学报,2025,51(8):2594-2604.
[24] GAO D P,LI B,LI Z,et al.Highly efficient flexible perovskite solar cells through pentylammonium acetate modification with certified efficiency of 23.35%[J].Advanced Materials,2023,35(3):2206387.
[25] WANG H,JIANG X,CAO Y X,et al.The first record of diurnal performance evolution of perovskite solar cells in near space[J].Advanced Energy Materials,2023,13(2):2202643.
[26] WU J,CHEN P,XU H,et al.Ultralight flexible perovskite solar cells[J].Science China Materials,2022,65(9):2319-2324.
[27] 王辉,张春福,曹越先,等.面向临近空间应用的柔性太阳电池试验研究进展[J].北京航空航天大学学报,2025,51(8):2632-2641.
[28] ZHANG B X,LUO J S,YIN H M,et al.A cross-linked molecular contact for stable operation of perovskite/silicon tandem solar cells[J].Science,2025,390(6775):837-842.
[29] WANG S B,LI W H,YU C,et al.Flexible perovskite/silicon tandem solar cells with 33.6% efficiency[J].Nature,2026,649(8095):59-64.
[30] 曹娜娜,陈萌炯,叶晓军.柔性薄膜太阳电池封装及环境耐受性研究[J].电源技术,2016,40(3):600-603.
[31] 冯洋,张超,申绪男,等.柔性薄膜太阳电池封装材料研究进展[J].百科论坛电子杂志,2021(13):2720.
[32] 李海宁,丁志强.太阳能电池片导电胶串焊技术及电池片受力分析[J].机械研究与应用,2016,29(2):99-100,103.
[33] 孙启利,胡志华,廖华,等.柔性薄膜太阳电池组件遮阴测试研究[J].电池工业,2012,16(4):231-233.
基本信息:
中图分类号:V442;TM914.4
引用信息:
[1]张丹红,孙国瑞.临近空间飞行器太阳电池应用现状及发展趋势[J].电池工业().
2026-03-24
2026-03-24
2026-03-24