参考文献

[1]SHAN X Y,LI F,WANG D W,et al.The smart era of electrochemical energy storage devices[J].Energy Storage Materials,2016,3:66-68．

[2]FENG X,OUYANG M,LIU X,et al.Thermal runaway mechanism of lithium ion battery for electric vehicles:Areview[J].Energy Storage Materials,2018,10:246-267．

[3]DIOUF B,PODE R.Potential of lithium-ion batteries in renewable energy[J].Renewable Energy,2015,76:375-380．

[4]FENG X,HE X,OUYANG M,et al.Thermal runaway propagation model for designing a safer battery pack with 25 Ah LiNixCoyMnzO2 large format lithium ion battery[J].Applied Energy,2015,154:74-91．

[5]GB 38031-2020电动汽车用动力蓄电池安全要求[S]．

[6]FENG X,REN D,HE X,et al.Mitigating Thermal Runaway of Lithium-Ion Batteries[J].Joule,2020,4:1-28．

[7]FENG X,FANG M,HE X,et al.Thermal runaway features of large format prismatic lithium ion battery using extended volume accelerating rate calorimetry[J].Journal of Power Sources,2014,255:294-301．

[8]FENG X,ZHENG S,REN D,et al.Investigating the thermal runaway mechanisms of lithium-ion batteries based on thermal analysis database[J].Applied Energy,2019,246:53-64．

[9]FENG X,ZHENG S,HE X,et al.Time Sequence Map for Interpreting the Thermal Runaway Mechanism of Lithium-Ion Batteries with LiNixCoyMnzO2Cathode[J].Frontiers in Energy Research,2018,6．

[10]冯旭宁．车用锂离子动力电池热失控诱发与扩展机理，建模与防控[D]．北京：清华大学汽车系，2016．

[11]CHAWLA N,BHARTI N,SINGH S.Recent Advances in Non-Flammable Electrolytes for Safer Lithium-Ion Batteries[J].Batteries,2019,5．

[12]WANG Q,JIANG L,YU Y,et al.Progress of enhancing the safety of lithium ion battery from the electrolyte aspect[J].Nano Energy,2019,55:93-114．

[13]RAHMAN M M,MATETI S,CAI Q,et al.High temperature and high rate lithium-ion batteries with boron nitride nanotubes coated polypropylene separators[J].Energy Storage Materials,2019,19:352-359．

[14]GAO S,FENG X,LU L,et al.An experimental and analytical study of thermal runaway propagation in a large format lithium ion battery module with NCM pouch-cells in parallel[J].International Journal of Heat and Mass Transfer,2019,135:93-103．

[15]LAMB J,ORENDORFF C J,STEELE L A M,et al.Failure propagation in multi-cell lithium ion batteries[J].Journal of Power Sources,2015,283:517-23．

[16]LI H,CHEN H,ZHONG G,et al.Experimental study on thermal runaway risk of 18650lithium ion battery under side-heating condition[J].Journal of Loss Prevention in the Process Industries,2019,61:122-129．

[17]GAO S,LU L,OUYANG M,et al.Experimental Study on Module-to-Module Thermal Runaway-Propagation in a Battery Pack[J].Journal of The Electrochemical Society,2019,166(10):A2065-A73．

[18]REN D,FENG X,LU L,et al.An electrochemical-thermal coupled overcharge-to-thermal-runaway model for lithium ion battery[J].Journal of Power Sources,2017,364:328-340．

[19]KRISTON A,KERSYS A,ANTONELLI A,et al.Initiation of thermal runaway in Lithium-ion cells by inductive heating[J].Journal of Power Sources,2020,454．

[20]解洪嘉，孙杰，李吉刚，等．锂离子电池电热触发热失控泄漏毒物研究[J]．储能科学与技术，2019,8(06):1082-1088．

[21]孙杰，李吉刚，周添，等．锂离子电池热失控致灾与灾害分析[J]．新材料产业，2017(09):39-42．

[22]WANG B,JI C,WANG S,et al.A Detailed Finite Element Model of Internal Short Circuit and Venting During Thermal Runaway in a 32650 Lithium-Ion Battery[J].Fire Technology,2020．

[23]HATCHARD D D M,BASU A,DAHN J R.Thermal Model of Cylindrical and Prismatic Lithium-Ion Cells[J].Journal of The Electrochemical Society,2001,148(7):A755-A761．

[24]KIM G-H,PESARAN A,SPOTNITZ R.A three-dimensional thermal abuse model for lithium-ion cells[J].Journal of Power Sources,2007,170(2):476-489．

[25]SPOTNITZA J F.Abuse behavior of high-power,lithiumion cells[J].Journal of Power Sources,2003,113:81-100．

[26]LEE C H,BAE S J,JANG M.A study on effect of lithium ion battery design variables upon features of thermalrunaway using mathematical model and simulation[J].Journal of Power Sources,2015,293:498-510．

[27]FENG X,HE X,LU L,et al.Analysis on the Fault Features for Internal Short Circuit Detection Using an Electrochemical-Thermal Coupled Model[J].Journal of The Electrochemical Society,2018,165(2):A155-A67．

[28]NREL.Modeling Lithium Ion Battery Safety:Venting of Pouch Cells[R].US:2013．

[29]CHE DAUD Z H,CHRENKO D,DOS SANTOS F,et al.3Delectro-thermal modelling and experimental validation of lithium polymer-based batteries for automotive applications[J].International Journal of Energy Research,2016,40(8):1144-1154．

[30]PING P,WANG Q,CHUNG Y,et al.Modelling electrothermal response of lithium-ion batteries from normal to abuse conditions[J].Applied Energy,2017,205:10327-1344．

[31]SPOTNITZ R M,WEAVER J,YEDUVAKA G,et al.Simulation of abuse tolerance of lithium-ion battery packs[J].Journal of Power Sources,2007,163(2):1080-1086．

[32]SMYSHLYAEV A,KRSTIC M,CHATURVEDI N,et al.PDE model for thermal dynamics of a large Li-ion battery pack[J].Proceedings of the American Control Conference,2011:959-964．

[33]CHEN M,SUN Q,LI Y,et al.A Thermal Runaway Simulation on a Lithium Titanite Battery and the Battery Module[J].Energies,2015,8(1):490-500．

[34]LIU X,WU Z,STOLIAROV S I,et al.A Thermo-Kinetic Model of Thermally-Induced Failure of a Lithium Ion Battery:Development,Validation and Application[J].Journal of The Electrochemical Society,2018,165(11):A2909-A2918．

[35]JIANG Z Y,QU Z G,ZHANG J F,et al.Rapid prediction method for thermal runaway propagation in battery pack based on lumped thermal resistance network and electric circuit analogy[J].Applied Energy,2020,268．

[36]WANG Q,MAO B,STOLIAROV S I,et al.A review of lithium ion battery failure mechanisms and fire prevention strategies[J].Progress in Energy and Combustion Science,2019,73:95-131．

[37]罗肖宁，一种电池箱热失控阻断防护片[P].CN:207425974U,2018-05-19．

[38]AL-ZAREER M,DINCER I,ROSEN M A.A review of novel thermal management systems for batteries[J].International Journal of Energy Research,2018,42(10):3182-3205．

[39]WU M,LIU K H,WANG Y,et al.Heat dissipation design for lithium-ion batteries[J].Journal of Power Sources,2002,109(1):160-166．

[40]ZHONG G,LI H,WANG C,et al.Experimental Analysis of Thermal Runaway Propagation Risk within 18650Lithium-Ion Battery Modules[J].Journal of The Electrochemical Society,2018,165(9):A1925-A1934．

[41]COLEMAN B,OSTANEK J,HEINZEL J.Reducing cellto-cell spacing for large-format lithium ion battery modules with aluminum or PCM heat sinks under failure conditions[J].Applied Energy,2016,180:14-26．

[42]MOHAMMED A H,ESMAEELI R,ALINIAGERDROUD-BARI H,et al.Dual-purpose cooling plate for thermal management of prismatic lithium-ion batteries during normal operation and thermal runaway[J].Applied Thermal Engineering,2019,160．

[43]MOHAMMED A H,ALHADRI M,ZAKRI W,et al.Design and Comparison of Cooling Plates for a Prismatic Lithium-ion Battery for Electrified Vehicles[C].SAETechnical Paper Series,2018．

[44]XU J,LAN C,QIAO Y,et al.Prevent thermal runaway of lithium-ion batteries with minichannel cooling[J].Applied Thermal Engineering,2017,110:883-890．

[45]WILKE S,SCHWEITZER B,KHATEEB S,et al.Preventing thermal runaway propagation in lithium ion battery packs using aphase change composite material:An experimental study[J].Journal of Power Sources,2017,340:51-59．

[46]KSHETRIMAYUM K S,YOON Y-G,GYE H-R,et al.Preventing heat propagation and thermal runaway in electric vehicle battery modules using integrated PCM and micro-channel plate cooling system[J].Applied Thermal Engineering,2019,159．

[47]HUANG P,VERMA A,ROBLES D J,et al.Probing the cooling effectiveness of phase change materials on lithium-ion battery thermal response under overcharge condition[J].Applied Thermal Engineering,2018,132:521-530．

[48]LIU T,LIU Y,WANG X,et al.Cooling control of thermally-induced thermal runaway in 18,650lithium ion battery with water mist[J].Energy Conversion and Management,2019,199．

[49]王兆聪．一种抑制和阻止锂离子电池热失控方法及装置[P].CN:106684499A,2017-05-17.