参考文献

[1]CHO Y,EOM J,CHO J.High performance LiCoO2cathode materials at 60℃for lithium secondary batteries prepared by the facile nanoscale dry-coating method[J].Journal of the Electrochemical Society,2010(157):A617-A624．

[2]ZHOU F,LUO W,ZHAO X,et al.Relative impact of Al or Mg substitution on the thermal stability of LiCo1-zMzO2(M=Al or Mg)by accelerating rate calorimetry[J].Journal of the Electrochemical Society,2009(156):A917-920．

[3]CASTRO-GARCIA S,CASTRO-COUCEIRO A,SE-NARIS-RODRIGUEZ M A,et al.Influence of aluminum doping on the properties of LiCoO2and LiNi0.5Co0.5O2oxides[J].Solid State Ionics,2003(156):15-26．

[4]JUNG H G,GOPAL N V,PRAKASH J,et al.Improved electrochemical performances of LiM0.05Co0.95O1.95F0.05(M=Mg,Al,Zr)at high voltage[J].Electrochimica Acta,2012,68(5):153-157．

[5]胡国荣，卢苇，梁龙伟，等．Ni-Mn共掺杂高电压钴酸锂锂离子电池正极材料[J]．无机化学学报，2015,31(1):159-165．

[6]ZHANG M,TAN M,ZHA H,et al.Enhanced high-voltage cycling stability and rate capability of magnesium and titanium co-doped lithium cobalt oxides for lithium-ion batteries[J].Applied Surface Science,2018,458(15):111-118．

[7]PARK M S,LEE J W,CHOI W,et al.On the surface modifications of high-voltage oxide cathodes for lithiumion batteries:new insight and significant safety improvement[J].Journal of Materials Chemistry,2010(20):7208-7213．

[8]MAUGER A,JULIEN C.Surface modifications of electrode materials for lithium-ion batteries:status and trends[J].Ionics,2014(20):751-787．

[9]ZHAO F,TANG Y,WANG J,et al.Vapor-assisted synthesis of Al2O3-coated LiCoO2for high-voltage lithium ion batteries[J].Electrochimica Acta,2015(174):384-390．

[10]JIAN Z,WANG W,WANG M,et al.Al2O3coated LiCoO2as cathode for high-capacity and long-cycling Li-ion batteries[J].Chinese Chemical Letters,2018(29):1768-1772．

[11]WANG F,JIANG Y,LIN S,et al.High-voltage performance of LiCoO2cathode studied by single particle microelectrodes-influence of surface modification with TiO2[J].Electrochimica Acta,2019(295):1017-1026．

[12]ZHOU A,LU Y,WANG Q,et al.Sputtering TiO2 on LiCoO2 composite electrodes as a simple and effective coating to enhance high-voltage cathode performance[J].Journal of Power Sources,2017(346):24-30．

[13]HE S,WEI A,LI W,et al.Al-Ti-oxide coated LiCoO2cathode material with enhanced electrochemical performance at a high cutoff charge potential 4.5V[J].Journal of Alloys and Compounds,2019(799):137-146．

[14]刘小虹，李国敏，李露，等．一种锂离子电池及其正极材料的制备方法．中国，ZL2014101744663[P].2014.04.28．

[15]SUN Y K,CHO S W,MYUNG S T,et al.Effect of AlF3coating amount on high voltage cycling performance of LiCoO2[J].Electrochimica Acta,2007(53):1013-1019．

[16]BAI Y,JIANG K,SUN S,et al.Performance improvement of LiCoO2by MgF2surface modification and mechanism exploration[J].Electrochimica Acta,2014(134):347-354．

[17]WANG Z,WANG Z,GUO H,et al.Enhanced high-voltage electrochemical performance of LiCoO2 coated with ZrOxFy[J].Material letters,2014(123):93-96．

[18]ABOULAICH A,OUZAOUIT K,FAQIR H,et al.Improving thermal and electrochemical performances of LiCoO2 cathode at high cut-off charge potentials by MF3(M=Ce,Al)coating[J].Materials Research Bulletin,2016(73):362-368．

[19]CHO J.Correlation between AlPO4nanoparticle coating thickness on LiCoO2 cathode and thermal stability[J].Electrochimica Acta,2003(48):2807-2811．

[20]CHO J,KIM B,LEE J G,et al.Annealing-temperature effect on various cutoff-voltage electrochemical performances in AlPO4-nanoparticle-coated LiCoO2[J].Journal of the Electrochemical Society,2005(152):A32-A36．

[21]KIM B,LEE J G,CHOI M,et al.Correlation between local strain and cycle-life performance of AlPO4-coated LiCoO2cathodes[J].Journal of Power Sources,2004(126):190-192．

[22]LI G,YANG Z,YANG W.Effect of FePO4coating on electrochemical and safety performance of LiCoO2 as cathode material for Li-ion batteries[J].Journal of Power Sources,2008(183):741-748．

[23]KIM K C,JEGAL J,BAK S,et al.Improved high-voltage performance of FePO4-coated LiCoO2 by microwave-assisted hydrothermal method[J].Electrochemistry Communications,2014(43):113-116．

[24]MORIMOTO H,AWANO H,TERASHIMA J,et al.Charge-discharge properties of LiCoO2electrodes modify by olivine-type compounds of LiMgPO4for lithium secondary batteries[J].Journal of Power Sources,2012(211):66-70．

[25]PARK J,CHO J,LEE E,et al.Thickness-tunable polyimide nanoencapsulating layers and their influence on cell performance/thermal stability of high-voltage LiCoO2cathode materials for lithium-ion batteries[J].Journal of Power Sources,2013(244):442-449．

[26]PARK J,CHO J,KIM J,et al.High-voltage cell performance and thermal stability of nanoarchitectured polyimide gel polymer electrolyte-coated LiCoO2cathode materials[J].Electrochimica Acta,2012(86):346-351．

[27]LEE E,PARK J,KIM J,et al.Direct surface modification of high-voltage LiCoO2cathodes by UV-cured nanothickness poly(ethylene glycol diacrylate)gel polymer electrolytes[J].Electrochimica Acta,2013(104):249-254．

[28]CAO J,HU G,PENG Z,et al.Polypyrrole-coated LiCoO2nanocomposite with enhanced electrochemical properties at high voltage for lithium-ion batteries[J].Journal of Power Sources,2015(281):49-55．

[29]YANG X,SHEN L,WU B,et al.Improvement of the cycling performance of LiCoO2 with assistance of crosslinked PAN for lithium-ion batteries[J].Journal of Alloys and Compounds,2015(639):458-464．

[30]WANG Z,WANG Z,GUO H,et al.Improving the cycling stability of LiCoO2at 4.5Vthrough co-modification by Mg doping and zirconium oxyfluoride coating[J].Ceramics International,2015(41):469-474．

[31]WANG Z,WANG Z,GUO H,et al.Mg doping and zirconium oxyfluoride coating co-modification to enhance the highvoltage performance of LiCoO2for lithium ion battery[J].Journal of Alloys and Compounds,2015(621):212-219．

[32]DENG Y,KANG T,MA Z,et al.Safety influences of the Al and Ti elements modified LiCoO2 materials on LiCoO2/graphite batteries under the abusive conditions[J].Electrochimica Acta,2019(295):703-709.