| 696 | 2 | 33 |
| 下载次数 | 被引频次 | 阅读次数 |
耐久性无疑是考量燃料电池工作性能的重要技术指标。本文介绍了目前燃料电池耐久测试的技术方法，分析了燃料电池耐久性的影响因素(燃料电池系统本体老化的影响和外部环境的影响),提出了从运行工况优化、系统控制策略优化两个方面改善燃料电池系统耐久性的实施路径，为燃料电池系统耐久性的提高提供了改进思路。
Abstract：Durability is undoubtedly an important technical indicator for considering the performance of fuel cells.This article provides an overview of the current technical methods for fuel cell durability testing, analyzes the influencing factors of fuel cell durability(fuel cell system aging and external environment),and proposes an implementation path to improve the durability of fuel cell systems from two aspects: operating condition optimization and system control strategy optimization, providing improvement ideas for improving the durability performance of fuel cell systems.
[1] 王克勇，石伟玉，王仁芳，等.车用燃料电池系统耐久性研究[J].电化学，2018,24(6):772-776.
[2] 吴晓辉.国内首次“四川造”氢燃料电池系统突破1万小时耐久性实测大关[EB/OL].(2022-10-13)[2023-09-26].https://finance.eastmoney.com/a/202210132528004960.html.
[3] 潍柴动力股份有限公司.公司氢燃料电池发动机寿命可达25 000小时最大续航里程600公里[EB/OL].(2021-04-17)[2023-09-26].https://www.yuncaijing.com/news/id_15170939.html.
[4] 中国电器工业协会.车用质子交换膜燃料电池堆使用寿命测试评价方法：GB/T 38914—2020[S].北京：中国标准出版社，2020.
[5] JAHROMI M M,HEIDARY H.Durability and economics investigations on triple stack configuration and its power management strategy for fuel cell vehicles[J].International Journal of Hydrogen Energy,2021,46(7):5740-5755.
[6] 商用车用质子交换膜燃料电池堆耐久性测评方法：DB37/T 4097—2020[S].
[7] 唐建均.质子交换膜燃料电池膜电极模拟工况耐久性研究[D].武汉：武汉理工大学，2011.
[8] ZHANG H T,LI X G,LIU X Z,et al.Enhancing fuel cell durability for fuel cell plug-in hybrid electric vehicles through strategic power management[J].Applied Energy,2019,241:483-490.
[9] SCHNEIDER I A,VON DAHLEN S.Start-stop phenomena in channel and land areas of a polymer electrolyte fuel cell[J].Electrochemical and Solid-State Letters,2011,14(2):B30.
[10] PAIK C,ADAMS J A,SALOKA G S,et al.Oxygen removal systems during fuel cell shutdown:US20070780101[P].US2009023040A1[2023-08-18].DOI:US20120315557 A1.
[11] OFSTAD A,DAVEY J,SUNDE S,et al.Carbon corrosion of a PEMFC during shut-down/start-up when using an air purge procedure[J].ECS Transactions,2008,16(2):1301-1311.
[12] 余意.质子交换膜燃料电池启停特性及控制策略研究[D].武汉：武汉理工大学，2013.
[13] KIM J H,CHO E A,JANG J H,et al.Development of a durable PEMFC startup process by applying a dummy load[J].Journal of the Electrochemical Society,2009,156(8):B955.
[14] LIU Z Y,CHEN J,LIU H,et al.Anode purge management for hydrogen utilization and stack durability improvement of PEM fuel cell systems[J].Applied Energy,2020,275:115110.
[15] BAI X Y,JIAN Q F,HUANG B,et al.Hydrogen starvation mitigation strategies during the start-up of proton exchange membrane fuel cell stack[J].Journal of Power Sources,2022,520:230809.
[16] LIU Z,CHEN H C,ZHANG T.Review on system mitigation strategies for start-stop degradation of automotive proton exchange membrane fuel cell[J].Applied Energy,2022,327:120058.
基本信息:
DOI：10.19996/j.cnki.ChinBatlnd.2024.02.007
中图分类号:TM911.4
引用信息:
[1]胡志祥,商政,熊文楷等.燃料电池耐久性优化方法研究[J].电池工业,2024,28(02):84-88.DOI:10.19996/j.cnki.ChinBatlnd.2024.02.007.
基金信息:
中汽研武汉培育课题(202210)资助